1548 Saybrook Road
Middletown CT 06457
1-860-343-0552
11 a.m. to 5 p.m. (wait 8-9 rings)

RUGER 77/ ACCURACY COMBO REWORK... Incoming rifles are first headspace gage inspected and needed correction is noted... V-block model barrels are set-back at breech end by .170" and lathe turned to the correct dimensions including new extractor cuts... New cut area on shank is left oversize to fit receivers hole  with a line to line fit to eliminate any droop... A new fill spacer for barrels v-block cut is made for proper barrel lock-up... Threaded receiver model barrels are lathe set-back by 2 threads, (.100")... All barrels are rechambered .0002" concentric to bore to a match chamber, chamber polished, bore gets lapped and new 11 degree recessed target crown cut to 00002" concentric... Barrels shank length is modified for correct minimum headspace... The gap and play in center of bolt is removed by tightening the bolt halves by manufacturing a new off-set pin and a steel ring pressed into bolt body, turned and lapped to remove all play... With bolt tightened the firing pin hits are more consistent, in the same place, reducing flyers bringing in accuracy...

RUGER 77/ACCURACY COMBO, .17 MK2, .17 HMR, .17 Hornet, .22 L.R., .22 MAGNUM, .22 Hornet, .22 KHornet... Send barreled action in, (receiver, bolt, trigger and barrel)... Combo includes barrel rework, bolt tightening, headspace correction and reassembly.. $199 plus return postage... Do not send stock nor scope...

CROWN OPTIONS

1.. Cut barrel to requested legal length, cut 11 degree recessed target crown. No charge with Combo... (Ruger barrels with factory open sights can not be cut shorter because they tend to lose accuracy)..

2.. Thread muzzle end for comp or silencer... Single point lathe cut threads concentric to bore, note thread size and thread length... Barrel has to be 600" dia or larger to thread.. Price is $119 plus shipping and handling... Add $20 for matching thread protector... 1/2-- 28 x .400" is common, others are available, call

SHIPPING & HANDLING...

Customer should call for return postage charge.. .Note caliber and barrel length... State and zip code...

U.S. Priority Mail return... 77/22's insured for $400... Add $1.50 for each $100 of extra insurance. 

Best to wipe down metal with a anti-rust oil before packing...


ORDERING...

Approximately 3 to 4 week turnaround on 77/Combos and 10/22's from May-Feb, approximately 45 days from Feb-May... Best method to pay is cash or money order -- write name and address on money order -- leave 'pay-to' area blank since CPC has its own bank stamp for money orders... Overpayments will be refunded...Connecticut addresses add 6.35% sales tax... P.O. box addresses are good... Please do not a send gun case, they are not a shipping box, will not be returned.. Please do not send stock, nor scope, nor guncase...

Send by Priority Mail only, no UPS or FedX... CPC is a Federal Licensed Manufacture of Firearms, FFL repair and customize facility... No middleman required, send part or rifle here and we send directly back to you since you already own it...


Logo's - Ruger, 10/22 & 77/22 are registered to Sturm Ruger Co