1548 Saybrook Road
Middletown CT 06457
1-860-343-0552
11 a.m. to 5 p.m. (wait 8-9 rings)

CPC 10/22 Bolt Rework,


C.P.C.
1548 Saybrook Rd
Middletown Ct 06457
860 343-0552 11:30 am - 6 pm eastern

Send in your bolt for the CPC 10/22 L.R. Bolt Combo Rework...
Bolt is disassembled and ultrasonically cleaned. Headspace is surface ground and squared to a .0425 rim depth, the same as a bolt action rifle too tweak in alittle accuracy... A hole is "E.D.M.'ed", a hardened ground solid dowel pin is pressed in over the top of the front of the firing pin... This new dowel pin keeps the front of firing pin from raising up and causing flyers and gives more consistent firing pin strikes... Firing pin is reworked and surface ground flat... Rear / bottom of bolt body is full radiused for smoother/better bolt function with standard and high velocity ammo's
Bolt rework is $43 plus $7 flat rate Priority Mail.
Send in $50 cash, money order or check. Add $10 for jeweling seen side. (See note 1 below)
Add $10 for CPC EDM tool steel extractor. (See note 2 below) Send in complete bolt, turnaround is approximately 2 1/2 weeks or less after it arrives. If more than one bolt package, do not multiply postage.

Note 1: CPC prism jeweling can be done on any bolt. Bolts with logos like RUGERŪ or 50TH etched in can be jeweled leaving logo intact. Remember jeweling is a $10 option.

Note 2: CPC makes extractors in different sizes, new extractor is fitted for correct gap in each bolt. EDM extractor fitted is a $10 option.


10/22 MAGNUM BOLTS are reworked with polishing - no jeweling unless requested - headspacing to .049 rim depth - new added dowel pin over the firing pin - small rear radius... Send complete bolt with $44 plus $11 s&h, includes $300 worth of insurance...
Duel extractor models - If you want the second extractor slot filled with Belzona 1111 Super metal as a attempt to strengthen that area - add $10 to order...

All orders are sent by U,S. Priority Mail...
Delivery outside the U.S. is sent Global Priority mail, price is $19 s&h, Canada, Ireland, England, any place where legal... Please do not send Canadian postal money orders or checks, call or send MC or Visa credit card # and expire date or U.S. cash...

Notes;
CPC does not exchange bolts or parts, customer gets their own bolt and parts back...
CPC does not work on Volquartsen bolts nor any non-Ruger made bolts...
CPC does work using customer provided aftermarket extractor and/or firing pin at no extra charge...
CPC REV.3 EDM EXTRACTORS are sold here and installed in either L.R. or Magnum bolts, - add $10 to order...

You can order 10/22 bolt rework noting - "Full radius",- which is used for normal shooting of standard and high velocity ammo, - or "Small Radius" on bolts mostly shooting .22 Hyper velocity ammo or the new .17 HM2...

Please send payment with order...
Please see rifle pictures on bottom of page...

Email: randyatcpc@gmail.com


Connecticut Precision Chambering LLC
1548 Saybrook Rd
Middletown CT 06457
1-860-343-0552 11:30 am - 6:00 pm eastern
randyatcpc@gmail.com
www.ct-precision.com

All and content copyrighted.
Copyrighted 2010-2017 Connecticut Precision
Chambering LLC, 07 FFL. All Rights Reserved.

9 photos below courtesy of Michael in Oregon
Jeweled bolt shows that you put some work into your rifle and even took care of the little things


8 y/o Isabel in Texas saved up her own money to get her bolt CPC'ed... (8 y/o)...You can make a 10/22 your own...




Solid dowel pin over firing pin.


CPC 10/22 bolt rework. Headspace is surface ground to .0425 depth. Prism jeweled.


CPC offers 10/22 Tuneups with many options below...
Optional but free cleaning hole in rear...
Tough nylon bolt stop pin is also free with CPC 10/22 Tuneups.
Standard on all Tuneups, - inside receiver is stoned flat, to remove burrs, but is not over polished.


CPC FreeBore chamber + chamber and entry polish. Barrels extractor slot is put in at correct angle and depth...
On carbine models with open sights, barrel is fixture installed so sights are leveled correctly on top...
About half of CPC 10/22 Tuneups are with open sight carbine barrels...


Added magazine release extension, overtravel stop, anti-creep stop, auto-bolt release and crisp 2.25 to 2.5 lb trigger pull all
standard on CPC 10/22 trigger job... $79 plus $6 s&h...
Trigger jobs on new plastic trigger groups are done here, no problem, I rather like them!..
(Plastic trigger groups already have a extended magazine release so no extension is added)....



Abbreviated Tuneup which includes barrel rework, - bolt rework and receiver work with no trigger job is $149 + s&h...
Tuneups are done with any brand bull or sporter barrel, about one half of all orders are with Ruger carbine barrel with open sights....
You can add $45 for threading any aluminum receiver and solid steel bull barrel as a option...
Click www.ct-precision.com 10/22 page and Crown options page for complete details... More pictures below...


Competition High Standard slab sided barrel with optional .22 Dovetail scope ring mount cuts in top of barrel to eliminate scope mount & lower dot sight... Custom made from a Douglas Premium XX air gaged barrel blank and blued by Glenrock Blue at www.gunbluing.com... Most are ordered drilled and tapped for the LSP scope base now-a-days, add $20 to order for drilling and tapping... See High Standard page on main website www.ct-precision.com... Picture is by 'Jack H'...


'T' barrel with target crown backbored in 2 inches deep for increased accuracy...
(Backbore can be done to Ruger 'T' barrels only, stainless or blued)...
See crown options page on main website www.ct-precision.com

Three crown options are available for Ruger hammer forged barrels,
(a) this is a backbored crown
(b) the sporter taper version (shown below) is also available plus
(c) a recessed target 11 degree crown, at any finished length customer wants...

There are also crown options for Tuneups done on the 10/22 using the carbine barrels with open sights or aftermarket barrels, ect...

Barrel is setback to a CPC FreeBore semi-auto match chamber designed for Ruger 10/22's, lapped,
recrowned by 1 of 3 different crown options and re-installed with a tighter lockup...



Ruger Stainless Target barrels only... Varmint Tapered from end of stock forward by 8.5" to a .62" dia recessed 11 degree target crown - varmint style... Removes 1/2 lb of front end weight and produces the best accuracy from the Ruger SS hammer forged barrel... Add $20 to the Tuneup for this option... See crown options page on main website... www.ct-precision.com




Ruger T barrel varmint style tapered crown...
This one was threaded into the Ruger receiver eliminating the V-block part making a stable rifle... Barrel is finished at 19 inches...